12/27/2023 0 Comments Pachislo skill stop slot machines![]() ![]() (BE CARE FULL PROBING ! ! !) Do NOT touch the probes together while you do this and short out the two locations you are Probing. If you have a meter (or get one) set it to a range that will read 24 volts DC. In the picture you will see a row of resistors with numbers above them. :ĭo you own a Multi Meter? If not the cheapest place you will find one is Harbor Freight. I no longer have a Pachislo with that Board in it. ![]() The issue as Wayne-Ooo stated is one of 3 things.:Ī bent, damaged pin / pins on the 4 connectors from the Stop Board or cold solder joint / joints on one or more of the connectors.Ī bent pin / pins on the 4 connectors from the Stop Board To their responding connector at the other end or cold solder joint / joints on one or more of the connectors.Ī broken wire / wires on the 4 connector harnesses from the Stop Board. Being that the Mother Board IS stopping the Reels on a Time out And the lights on the Stop Buttons do go out when this happens I am more than sure that all of the wiring on the innrer door and from the inner door to the Mother Board is good. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |